factory Outlets for Mppt 20a 30a 40a 50a Solar Charge Controller 12v 24v With Mobile App Monitoring
Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for factory Outlets for Mppt 20a 30a 40a 50a Solar Charge Controller 12v 24v With Mobile App Monitoring, We look forward to determine a long-term organization marriage with your esteem co-operation.
Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for Solar Charge Controller, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
Tracer Dream Series(TD in short) adopts MPPT technology.It’s also ran by 32 bits CPU, So stability and speed can be guaranteed.Based on the synchronous rectifier technology,the transfer efficiency of circuit can be increased up to 98% and the Pmax tracking accuracy up to 99.5%. So our MPPT can trace the accurate Pmax in the shortest time, even when the sunlight changes rapidly. It can perfectly handle extreme weather or weak sunlight.
FEATURES:
1.32 bits CPU combined with advanced MPPT technology,fast and stable track the Maximum Power Point, tracking accuracy 99.5%.
2.Adopt Synchronous Rectifier Technology, significantly improve the transfer efficiency of circuit, maximum 98%.
3.Accurate identification and tracking multi peak power point function.
4.PV array limited power input function, to ensure that the controller does not overload operation under any conditions.
5.12V/24V DC Automatic identify system voltage.
6.Sealed,Gel,Flooded battery selection procedure.
7.Load control mode:Sensor mode,Time mode
8.Operation log function:account charging and discharging ampere hour of the system the working days,times of HVD, times of LVD and times of over current protection.
9.Accurate temperature compensation, it can automatically accommodate the charging voltage according to the environmental temperature, optimizing for long battery life.
10.Patented large-diameter with 25mm2, red and black connector distinguish positive and negative pole avoiding wrong operation.
ELECTRONIC PROTECTIONS:
1.PV reverse polarity protection
2.PV over voltage protection
3.PV limited current protection
4.PV short circuit protection
5.Thunder protection
6.Battery overcharge protection
7.Battery over discharge protection
8.Battery reverse polarity protection
9.Load overload protection
10.Load short circuit protection
11.Over Temperature Protection
Mode |
TD2107 |
System Voltage |
12V/24V |
PV Max Input Voltage |
75V |
PV Max Input Power |
12V 190W;24V 380W |
Self-consumption |
≤25mA |
Max Charging current |
15A |
Max Discharging current |
15A |
LVD |
11.0V ADJ 9V….12V;×2/24V |
LVR |
12.6V ADJ 11V….13.5V;×2/24V |
Float Voltage |
13.8V ADJ 13V….15V;×2/24V; |
Boost Voltage |
14.4V;×2/24battery voltage less than 12.6v restart boost 2hours |
Battery Over Voltage Protection |
16.5V;×2/24V |
Reverse Connection Protection |
Yes |
Load Over Current Protection |
Yes, each 30s auto restart again |
Controller Over Temperature Protection |
Yes |
Charging Type |
MPPT |
Temperature Compensation |
-24mV/℃ for 12Vsystem ;×2/24V;×4/48V |
Working Temperature |
-20℃ — +55℃ |
Terminals scale |
10mm2 |
Waterproof grade |
IP32 |
Size |
165×123×46mm |
New weight |
0.56KG |