Ocean Dream Series
OD Series PWM Solar Controller
Better than less
视频播放失败，请联系站点管理员！
Built-in screwdriver
Worry-free use,It is there whenever you need it
| 1.Automatical Voltage Switch | 2.Over charging and over discharging protection | 3.Overload protection | 4.Short Circuit Protection |
|
Ldsolar controller can switch the system voltage according to the battery voltage automatically
|
Ldsolar controller can prevent the battery from over charging and over discharging and increasing the battery life. | Ldsolar controller will cut off output ,if the curent of output is more than 1.1 times rated current | When the solar panel or the Load is short circuit,Ldsolar controller can stop charging or turn off the output immediately.It can prevent battery from damaging |
| 5.Reverse Connected Protection | 6.Battery Over Voltage Protection | 7.Auto Temperature Compensation | 8.Over Temperature Protection |
| If the polarity of battery or solar panel is reversely connected ,Ldsolar controller will not be destroyed.After correcting the connection,Ldsolar controller will work normally. | When the voltage of battery was more than 16.5V(12V system),Ldsolar controller will turn off charging and output. | The in-built sensor in Ldsolar controller can sense the outside temperature and regulate the battery charging and over discharging.It can increase battery life upto 30% | When the temperature of inside controller is uptp 85℃，the controller will stop charging and discharging. |
| 9.Lighting Protection | 10.Multiple load work modes | 11.Prevent Reverse Flow of Current | 12.Battery Type Selection |
| Ldsolar controller could protect small induction thunder | Ldsolar controller can automtically detect when the day sets and night begins and set a working time.It can switch on /off the output automtically | During nighttime when voltage of battery is more than that of solar panel,current could start flowing from battery to panels,This could be very harmful for solar panel.Ldsolar controller ensures that the current always flow from panels to batteries,and never in the reverse direction. | Ldsolar controller is deigned for multiple battery type-Sealed,Gel,Flooded,LiFePO4 and LiO2 to ensure efficient charging. |
12 Safety Protections
Simple Design，Good looking
The OD series adopts rounded corners and a simple appearance design.
The white frosted plastic shell is very natural no matter where it is placed in your home or RV.
Free USB Charging
Support high current mode, the maximum 2.4A charging current charges your mobile device faster
10A / 20A * 2 USB, Other items 4USB
Hidden Design
The OD series adopts a sliding cover design, which covers the terminal and screwdriver.
It hides the messy wires of the connection port by extending the lower edge.It can match your furniture style bettre
Which one is right for you!
After-Sale Warranty
Warranty
The PWM controller provides a 1.5 years warranty, and the MPPT controller provides a 3 years warranty.
Factory Commitment
1.We promise that the solar controllers produced by our company are full power.
2.We promise that never use old components, "Fake one, Fine 100,000RMB".
Worry-free after sales
1.During the warranty period, non-artificial product failures occur, our company promises to replace new one for free
2.After “three-step confirmation " to quickly identify.
ARM architecture, high-quality 32-bit main control chip
Make your system more stable and efficient
The main control chip adopts STMicroelectronics, and the other components adopt Samsung and Fenghua Hi-tech components to ensure the stability and life of the controller.
The running program of the upgradeable frame structure guarantees the low loss of the controller and makes it more efficient.
Customized large-diameter red and black terminals (Patented)
*Customized large-diameter port is more suitable for solar systems that require large-diameter wires to reduce the voltage drop and losses in wires
*The red and black design allows customers to distinguish positive and negative more intuitively, and good customer experience
*The shrapnel is designed in the crimping frame to avoid breaking the wire and causing poor contact
Installation
1.Find the positioning map on the back of the color box or on the manual
2.Use the positioning map to fix the screw in the position you want
3.Mount the controller. The 10A / 20A style also has two fixing holes in the terminal cover, which can be installed with screws
Packing List
Controller*1PC
User's Manual*1PC
Screwdriver*1PC
Product parameters
| Model | OD2410C | OD2420C | OD2430C | OD2430S | OD2440S | OD2450S | OD2460S | OD4830S | OD4840S | OD4850S | OD4860S |
| System Voltage | 12V/24V DC auto | 12V/24V/48V DC auto | |||||||||
| PV Max Input Voltage | 55V | 100V | |||||||||
| Self-consumption | <10mA | ||||||||||
| Max Charging current | 10A | 20A | 30A | 30A | 40A | 50A | 60A | 30A | 40A | 50A | 60A |
| Max Discharging current | 10A | 20A | 20A | 30A | 40A | 50A | 60A | 30A | 40A | 50A | 60A |
| Battery type | Sealed(Default)/Gel/Flood/Lithium | ||||||||||
| LVD※* | 11.0V ADJ 9V...12V ; x2/24V ; x4/48V | ||||||||||
| LVR※* | 12.6V ADJ 11V...13.5V ；x2/24V ; x4/48V | ||||||||||
| Float Voltage※* | 13.8V ADJ 13V... 15V ; x2/24V ; M/48V | ||||||||||
| Boost Voltage※* | 14.4V ADJ 13V...17V ；x2/24 ; x4/48V | ||||||||||
| battery voltage less than 12.6v auto boost 2hours | |||||||||||
| Battery Over Voltage ※* | 16.5V ; x2/24V ; x4/48V | ||||||||||
| Reverse Connection Protection | Yes | ||||||||||
| Load Over Current Protection | Yes, each 30s auto restart again | ||||||||||
| Controller Over Temperature | Yes | ||||||||||
| USB Output | 5VDC/1.5A 2PCS | 5VDC/2.4A 4PCS | 5VDC/2.4A 4PCS | ||||||||
| Charging Type | PWM | ||||||||||
| Charge circuit voltage drop | <=0.25V | ||||||||||
| Discharge circuit voltage drop | <=0.1V | ||||||||||
| Temperature Consumption# | For 12Vsystem:-24mV /°C ; x2/24V ; x4/48V | ||||||||||
| Relative humidity | ≤95%, N.C. | ||||||||||
| WorkingTemperature | -20°C~+55℃(Product can work continuously at full load) | ||||||||||
| LCD temperature range | -20°C~+70°C | ||||||||||
| Waterproof grade | IP32 | ||||||||||
| Mounting hole size | Φ5mm | ||||||||||
| Terminals | 10mm²/8AWG | 16mm² /6AWG | 25mm²/4AWG | 16mm² /6AWG | 25mm²/4AWG | ||||||
| Weight | 225g | 350g | 380g | 480g | 520g | 690g | 780g | 500g | 540g | 710g | 800g |
| Overall dimension(mm) | 165*120*39.4 | 170*130*50 | 190*145*55 | 170*130*50 | 190*145*56 | ||||||
#when bettery type is setted to Lithium battery,Temperature consumption is 0,unchangeable. ※Above the parameters are in 12V system at 25℃, twice in 24V system and quadruple in 48V system *The default value is set based on the lead-acid battery. For other battery type, please refer to the manual
